States ›Washington ›Snohomish County ›Martha Lake

Martha Lake, WA Tap Water Quality 2026

Water quality report for Martha Lake, WA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Martha Lake's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Alderwood Water District PWSID: WA5301300 Updated: 2026 Q2
🚨

Lead above the federal action level

Lead is 28.00 ppb, 187% of the action level and no violations are open. No PFAS was detected.

C

Martha Lake earns a C for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 28.00 ppb — 187% of the federal action level
PFAS tested, none detected
No violations since 2015
No violations currently open
Martha Lake's lead level vs. all Washington community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 28.00 ppb — 100% of the federal action level
✓ Lower lead than 3% of Washington utilities
Population Served
19984
~85285 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
100% of EPA action level
28.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 28.00 ppb, 187% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Alderwood Water District
PWSID WA5301300
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 19,984
Service connections 85,285
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Martha Lake tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 28.00 ppb, 187% of the action level.
Does Martha Lake water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Martha Lake? ▼
Alderwood Water District (PWSID WA5301300), one of 2 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2025-10-21. Inspectors recorded 1 significant deficiency.

What Should Martha Lake Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Washington

Everett, Wa Tap Water Quality 2026 Snohomish Marysville, Wa Tap Water Quality 2026 Snohomish Lynnwood, Wa Tap Water Quality 2026 Snohomish Lake Stevens, Wa Tap Water Quality 2026 Snohomish Edmonds, Wa Tap Water Quality 2026 Snohomish Bothell West, Wa Tap Water Quality 2026 Snohomish