States ›Washington ›Snohomish County ›Edmonds

Edmonds, WA Tap Water Quality 2026

Water quality report for Edmonds, WA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Edmonds's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Edmonds City Of PWSID: WA5322500 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead has not been reported for this system and no violations are open. No PFAS was detected.

B

Edmonds earns a B for water quality

Graded on violations and PFAS, with state inspection findings. Lead not reported.

Lead: not reported
PFAS tested, none detected
2 violations since 2015, 0 health-based
No violations currently open
Edmonds's lead level vs. all Washington community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: — 0% of the federal action level
✓ Lower lead than % of Washington utilities
Population Served
32700
~10367 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Action level: 15 ppb
No lead result has been reported for this system in the current window. That is a gap in state reporting, not a finding of safety.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2026 Archived
TTHM MONITORING AND REPORTING — 0.080 mg/L 2026 Archived
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Edmonds City Of
PWSID WA5322500
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 32,700
Service connections 10,367
Systems serving this area 6
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Edmonds tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Edmonds water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Edmonds? ▼
Edmonds City Of (PWSID WA5322500), one of 6 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2023-07-10. No significant deficiencies were recorded.

What Should Edmonds Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Washington

Everett, Wa Tap Water Quality 2026 Snohomish Marysville, Wa Tap Water Quality 2026 Snohomish Lynnwood, Wa Tap Water Quality 2026 Snohomish Lake Stevens, Wa Tap Water Quality 2026 Snohomish Bothell West, Wa Tap Water Quality 2026 Snohomish Mountlake Terrace, Wa Tap Water Quality 2026 Snohomish