States ›Texas ›Williamson County ›Florence

Florence, TX Tap Water Quality 2026

Water quality report for Florence, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Florence's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: City Of Florence PWSID: TX2460005 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 2.21 ppb, 15% of the action level and no violations are open. PFAS has never been sampled at this system.

B

Florence earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 2.21 ppb — 15% of the federal action level
PFAS never sampled at this system
37 violations since 2015, 5 health-based
No violations currently open
Florence's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 2.21 ppb — 15% of the federal action level
✓ Lower lead than 31% of Texas utilities
Population Served
1171
~521 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
37 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
15% of EPA action level
2.21 ppb
Action level: 15 ppb
The 90th-percentile lead result is 2.21 ppb, 15% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Public Notice OTHER — — 2026 Unaddressed
TTHM MCL EXCEEDANCE 0.145 MG/L 0.080 mg/L 2026 Archived
Lead and Copper Rule MONITORING AND REPORTING — TT 2025 Resolved
Public Notice OTHER — — 2025 Resolved
TTHM MCL EXCEEDANCE 0.137 MG/L 0.080 mg/L 2025 Archived
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2025 Unaddressed
TTHM MCL EXCEEDANCE 0.103 MG/L 0.080 mg/L 2025 Archived
Public Notice OTHER — — 2025 Resolved
TTHM MCL EXCEEDANCE 0.096 MG/L 0.080 mg/L 2025 Archived
LEAD AND COPPER RULE REVISIONS TREATMENT TECHNIQUE — — 2024 Resolved
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Dalapon MONITORING AND REPORTING — 0.2 mg/L 2021 Resolved
Picloram MONITORING AND REPORTING — 0.5 mg/L 2021 Resolved
Dinoseb MONITORING AND REPORTING — 0.007 mg/L 2021 Resolved
2,4-D MONITORING AND REPORTING — 0.07 mg/L 2021 Resolved
2,4,5-TP MONITORING AND REPORTING — 0.05 mg/L 2021 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2019–2021 Archived
OXAMYL MONITORING AND REPORTING — 0.2 mg/L 2019–2021 Archived
Aldicarb sulfoxide MONITORING AND REPORTING — — 2019–2021 Archived
Aldicarb sulfone MONITORING AND REPORTING — — 2019–2021 Archived
Carbofuran MONITORING AND REPORTING — 0.04 mg/L 2019–2021 Archived
Aldicarb MONITORING AND REPORTING — — 2019–2021 Archived
Arsenic MONITORING AND REPORTING — 0.010 mg/L 2019–2021 Archived
Barium MONITORING AND REPORTING — 2 mg/L 2019–2021 Archived
Cadmium MONITORING AND REPORTING — 0.005 mg/L 2019–2021 Archived
Chromium MONITORING AND REPORTING — 0.1 mg/L 2019–2021 Archived
Mercury MONITORING AND REPORTING — 0.002 mg/L 2019–2021 Archived
Antimony, Total MONITORING AND REPORTING — 0.006 mg/L 2019–2021 Archived
Beryllium, Total MONITORING AND REPORTING — 0.004 mg/L 2019–2021 Archived
Thallium, Total MONITORING AND REPORTING — 0.002 mg/L 2019–2021 Archived
Selenium MONITORING AND REPORTING — 0.05 mg/L 2019–2021 Archived
1,2-DIBROMO-3-CHLOROPROPANE MONITORING AND REPORTING — 0.0002 mg/L 2019–2021 Archived
ETHYLENE DIBROMIDE MONITORING AND REPORTING — 0.00005 mg/L 2019–2021 Archived
Lead and Copper Rule MONITORING AND REPORTING — TT 2016 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2015 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

37 violations are on record since 2015, of which 5 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility City Of Florence
PWSID TX2460005
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 1,171
Service connections 521
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Florence tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 2.21 ppb, 15% of the action level.
Does Florence water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Florence? ▼
City Of Florence (PWSID TX2460005). Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2024-10-16. No significant deficiencies were recorded.

What Should Florence Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas

Round Rock, Tx Tap Water Quality 2026 Williamson Cedar Park, Tx Tap Water Quality 2026 Williamson Georgetown, Tx Tap Water Quality 2026 Williamson Leander, Tx Tap Water Quality 2026 Williamson Hutto, Tx Tap Water Quality 2026 Williamson Taylor, Tx Tap Water Quality 2026 Williamson