States ›Texas ›Williamson County ›Taylor

Taylor, TX Tap Water Quality 2026

Water quality report for Taylor, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Taylor's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: City Of Taylor PWSID: TX2460004 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.93 ppb, 13% of the action level and no violations are open. PFAS was detected below the federal limit.

A

Taylor earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.93 ppb — 13% of the federal action level
PFAS detected below the federal limit
6 violations since 2015, 2 health-based
No violations currently open
Taylor's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.93 ppb — 13% of the federal action level
✓ Lower lead than 38% of Texas utilities
Population Served
15884
~7475 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
6 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
13% of EPA action level
1.93 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.93 ppb, 13% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2020 Resolved
Consumer Confidence Rule OTHER — — 2016 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2016 Resolved
Coliform (TCR) MCL EXCEEDANCE — 5% of samples 2015 Resolved
Public Notice OTHER — — 2015 Resolved
Coliform (TCR) MCL EXCEEDANCE — 5% of samples 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

6 violations are on record since 2015, of which 2 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility City Of Taylor
PWSID TX2460004
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 15,884
Service connections 7,475
Systems serving this area 4
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Taylor tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.93 ppb, 13% of the action level.
Does Taylor water have PFAS? ▼
PFAS was detected but stayed below the federal limit.
Who supplies water to Taylor? ▼
City Of Taylor (PWSID TX2460004), one of 4 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2025-04-01. No significant deficiencies were recorded.

What Should Taylor Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas

Round Rock, Tx Tap Water Quality 2026 Williamson Cedar Park, Tx Tap Water Quality 2026 Williamson Georgetown, Tx Tap Water Quality 2026 Williamson Leander, Tx Tap Water Quality 2026 Williamson Hutto, Tx Tap Water Quality 2026 Williamson Brushy Creek, Tx Tap Water Quality 2026 Williamson