States ›New York ›Clinton County ›Schuyler Falls

Schuyler Falls, NY Tap Water Quality 2026

Water quality report for Schuyler Falls, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Schuyler Falls's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Morrisonville Water District PWSID: NY0900226 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.40 ppb, 9% of the action level and no violations are open. PFAS has never been sampled at this system.

B

Schuyler Falls earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 1.40 ppb — 9% of the federal action level
PFAS never sampled at this system
No violations since 2015
No violations currently open
Schuyler Falls's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.40 ppb — 9% of the federal action level
✓ Lower lead than 76% of New York utilities
Population Served
634
~330 connections
Water Source
Groundwater
Purchased groundwater from another system — SDWIS source code GWP
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
9% of EPA action level
1.40 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.40 ppb, 9% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Morrisonville Water District
PWSID NY0900226
Water source Groundwater — Purchased groundwater from another system — SDWIS source code GWP
Population served 634
Service connections 330
Systems serving this area 4
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Schuyler Falls tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.40 ppb, 9% of the action level.
Does Schuyler Falls water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Schuyler Falls? ▼
Morrisonville Water District (PWSID NY0900226), one of 4 systems serving this area. Groundwater. Purchased groundwater from another system — SDWIS source code GWP
When was this system last inspected? ▼
It was last inspected on 2026-03-25. No significant deficiencies were recorded.

What Should Schuyler Falls Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Plattsburgh, Ny Tap Water Quality 2026 Clinton Plattsburgh, Ny Tap Water Quality 2026 Clinton Keeseville, Ny Tap Water Quality 2026 Clinton Champlain, Ny Tap Water Quality 2026 Clinton Peru, Ny Tap Water Quality 2026 Clinton Dannemora, Ny Tap Water Quality 2026 Clinton