States ›New York ›Clinton County ›Keeseville

Keeseville, NY Tap Water Quality 2026

Water quality report for Keeseville, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Keeseville's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Chesterfield Wd PWSID: NY1500283 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

C

Keeseville earns a C for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
9 violations since 2015, 8 health-based
No violations currently open
Keeseville's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of New York utilities
Population Served
2322
~1000 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
9 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
186.9% of EPA action level
2,430 ppb
Action level: 1,300 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 76.2 UG/L 0.060 mg/L 2018 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 82.3 UG/L 0.060 mg/L 2018 Archived
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 62.9 UG/L 0.060 mg/L 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 60.95 UG/L 0.060 mg/L 2016 Resolved
Interim Enhanced Surface Water Treatment Rule TREATMENT TECHNIQUE — — 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 60.3 UG/L 0.060 mg/L 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 63.9 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 67.1 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

9 violations are on record since 2015, of which 8 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Chesterfield Wd
PWSID NY1500283
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 2,322
Service connections 1,000
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Keeseville tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Keeseville water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Keeseville? ▼
Chesterfield Wd (PWSID NY1500283). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-11-14. No significant deficiencies were recorded.

What Should Keeseville Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Plattsburgh, Ny Tap Water Quality 2026 Clinton Plattsburgh, Ny Tap Water Quality 2026 Clinton Champlain, Ny Tap Water Quality 2026 Clinton Peru, Ny Tap Water Quality 2026 Clinton Dannemora, Ny Tap Water Quality 2026 Clinton Dannemora, Ny Tap Water Quality 2026 Clinton