States ›Wisconsin ›Dane County ›Cross Plains

Cross Plains, WI Tap Water Quality 2026

Water quality report for Cross Plains, WI — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Cross Plains's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Cross Plains Waterworks PWSID: WI1130219 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 4.80 ppb, 32% of the action level and no violations are open. No PFAS was detected.

A

Cross Plains earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 4.80 ppb — 32% of the federal action level
PFAS tested, none detected
2 violations since 2015, 0 health-based
No violations currently open
Cross Plains's lead level vs. all Wisconsin community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 4.80 ppb — 32% of the federal action level
✓ Lower lead than 19% of Wisconsin utilities
Population Served
~1518 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
32% of EPA action level
4.80 ppb
Action level: 15 ppb
The 90th-percentile lead result is 4.80 ppb, 32% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Consumer Confidence Rule OTHER — — 2024 Resolved
Consumer Confidence Rule OTHER — — 2024 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Cross Plains Waterworks
PWSID WI1130219
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served
Service connections 1,518
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Cross Plains tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 4.80 ppb, 32% of the action level.
Does Cross Plains water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Cross Plains? ▼
Cross Plains Waterworks (PWSID WI1130219), one of 2 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2024-09-23. Inspectors recorded 2 significant deficiencies.

What Should Cross Plains Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Wisconsin

Madison, Wi Tap Water Quality 2026 Dane Sun Prairie, Wi Tap Water Quality 2026 Dane Fitchburg, Wi Tap Water Quality 2026 Dane Middleton, Wi Tap Water Quality 2026 Dane Verona, Wi Tap Water Quality 2026 Dane Waunakee, Wi Tap Water Quality 2026 Dane