States ›Washington ›Walla Walla County ›Wallula

Wallula, WA Tap Water Quality 2026

Water quality report for Wallula, WA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Wallula's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Wallula Water District PWSID: WA5392600 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Wallula earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
30 violations since 2015, 0 health-based
No violations currently open
Wallula's lead level vs. all Washington community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Washington utilities
Population Served
140
~62 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
30 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Consumer Confidence Rule OTHER — — 2025 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2024 Resolved
Arsenic MONITORING AND REPORTING — 0.010 mg/L 2022 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2022 Resolved
Arsenic MONITORING AND REPORTING — 0.010 mg/L 2021 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2021 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2021 Resolved
1,2,4-Trichlorobenzene MONITORING AND REPORTING — 0.07 mg/L 2020–2025 Archived
cis-1,2-Dichloroethylene MONITORING AND REPORTING — 0.07 mg/L 2020–2025 Archived
DICHLOROMETHANE MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
o-Dichlorobenzene MONITORING AND REPORTING — 0.6 mg/L 2020–2025 Archived
p-Dichlorobenzene MONITORING AND REPORTING — 0.075 mg/L 2020–2025 Archived
Vinyl chloride MONITORING AND REPORTING — 0.002 mg/L 2020–2025 Archived
1,1-Dichloroethylene MONITORING AND REPORTING — 0.007 mg/L 2020–2025 Archived
trans-1,2-Dichloroethylene MONITORING AND REPORTING — 0.1 mg/L 2020–2025 Archived
1,2-Dichloroethane MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
1,1,1-Trichloroethane MONITORING AND REPORTING — 0.2 mg/L 2020–2025 Archived
Carbon tetrachloride MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
1,2-Dichloropropane MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
Trichloroethylene MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
1,1,2-Trichloroethane MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
Tetrachloroethylene MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
CHLOROBENZENE MONITORING AND REPORTING — 0.1 mg/L 2020–2025 Archived
Benzene MONITORING AND REPORTING — 0.005 mg/L 2020–2025 Archived
Toluene MONITORING AND REPORTING — 1 mg/L 2020–2025 Archived
Ethylbenzene MONITORING AND REPORTING — 0.7 mg/L 2020–2025 Archived
Styrene MONITORING AND REPORTING — 0.1 mg/L 2020–2025 Archived
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2019 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2019 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2016 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

30 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Wallula Water District
PWSID WA5392600
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 140
Service connections 62
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Wallula tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Wallula water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Wallula? ▼
Wallula Water District (PWSID WA5392600). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2020-10-13. No significant deficiencies were recorded.

What Should Wallula Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Washington

Walla Walla, Wa Tap Water Quality 2026 Walla Walla College Place, Wa Tap Water Quality 2026 Walla Walla Walla Walla East, Wa Tap Water Quality 2026 Walla Walla Waitsburg, Wa Tap Water Quality 2026 Walla Walla Burbank, Wa Tap Water Quality 2026 Walla Walla Garrett, Wa Tap Water Quality 2026 Walla Walla