States ›Washington ›Kitsap County ›Navy Yard City

Navy Yard City, WA Tap Water Quality 2026

Water quality report for Navy Yard City, WA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Navy Yard City's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Bremerton City Of PWSID: WA5308200 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 5.00 ppb, 33% of the action level and no violations are open. No PFAS was detected.

A

Navy Yard City earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 5.00 ppb — 33% of the federal action level
PFAS tested, none detected
2 violations since 2015, 0 health-based
No violations currently open
Navy Yard City's lead level vs. all Washington community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 5.00 ppb — 33% of the federal action level
✓ Lower lead than 14% of Washington utilities
Population Served
2759
~30371 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
33% of EPA action level
5.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 5.00 ppb, 33% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Surface Water Treatment Rule MONITORING AND REPORTING — — 2021 Resolved
Surface Water Treatment Rule MONITORING AND REPORTING — — 2019 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Bremerton City Of
PWSID WA5308200
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 2,759
Service connections 30,371
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Navy Yard City tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 5.00 ppb, 33% of the action level.
Does Navy Yard City water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Navy Yard City? ▼
Bremerton City Of (PWSID WA5308200). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-04-08. No significant deficiencies were recorded.

What Should Navy Yard City Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Washington

Bremerton, Wa Tap Water Quality 2026 Kitsap Silverdale, Wa Tap Water Quality 2026 Kitsap Poulsbo, Wa Tap Water Quality 2026 Kitsap Bainbridge Island, Wa Tap Water Quality 2026 Kitsap Port Orchard, Wa Tap Water Quality 2026 Kitsap Parkwood, Wa Tap Water Quality 2026 Kitsap