States ›Washington ›Clallam County ›Jamestown

Jamestown, WA Tap Water Quality 2026

Water quality report for Jamestown, WA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Jamestown's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Sunland Shores PWSID: WA5385257 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Jamestown earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
1 violations since 2015, 0 health-based
No violations currently open
Jamestown's lead level vs. all Washington community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Washington utilities
Population Served
218
~57 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
1 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Consumer Confidence Rule OTHER — — 2018 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

1 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Sunland Shores
PWSID WA5385257
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 218
Service connections 57
Systems serving this area 4
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Jamestown tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Jamestown water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Jamestown? ▼
Sunland Shores (PWSID WA5385257), one of 4 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2023-04-21. No significant deficiencies were recorded.

What Should Jamestown Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Washington

Port Angeles, Wa Tap Water Quality 2026 Clallam Sequim, Wa Tap Water Quality 2026 Clallam Forks, Wa Tap Water Quality 2026 Clallam Port Angeles East, Wa Tap Water Quality 2026 Clallam Neah Bay, Wa Tap Water Quality 2026 Clallam Bell Hill, Wa Tap Water Quality 2026 Clallam