States ›Texas ›Tarrant County ›Bedford

Bedford, TX Tap Water Quality 2026

Water quality report for Bedford, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Bedford's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: City Of Bedford PWSID: TX2200003 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 0.80 ppb, 5% of the action level and no violations are open. PFAS was detected below the federal limit.

A

Bedford earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 0.80 ppb — 5% of the federal action level
PFAS detected below the federal limit
No violations since 2015
No violations currently open
Bedford's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 0.80 ppb — 5% of the federal action level
✓ Lower lead than 90% of Texas utilities
Population Served
48591
~23674 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
5% of EPA action level
0.80 ppb
Action level: 15 ppb
The 90th-percentile lead result is 0.80 ppb, 5% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility City Of Bedford
PWSID TX2200003
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 48,591
Service connections 23,674
Systems serving this area 4
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Bedford tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 0.80 ppb, 5% of the action level.
Does Bedford water have PFAS? ▼
PFAS was detected but stayed below the federal limit.
Who supplies water to Bedford? ▼
City Of Bedford (PWSID TX2200003), one of 4 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2023-04-20. No significant deficiencies were recorded.

What Should Bedford Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas

Fort Worth, Tx Tap Water Quality 2026 Tarrant Arlington, Tx Tap Water Quality 2026 Tarrant North Richland Hills, Tx Tap Water Quality 2026 Tarrant Euless, Tx Tap Water Quality 2026 Tarrant Mansfield, Tx Tap Water Quality 2026 Tarrant Grapevine, Tx Tap Water Quality 2026 Tarrant