States ›Texas ›Jack County ›Jacksboro

Jacksboro, TX Tap Water Quality 2026

Water quality report for Jacksboro, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Jacksboro's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: City Of Jacksboro PWSID: TX1190002 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.80 ppb, 12% of the action level and no violations are open. No PFAS was detected.

B

Jacksboro earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.80 ppb — 12% of the federal action level
PFAS tested, none detected
9 violations since 2015, 4 health-based
No violations currently open
Jacksboro's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.80 ppb — 12% of the federal action level
✓ Lower lead than 44% of Texas utilities
Population Served
4178
~1864 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
9 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
12% of EPA action level
1.80 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.80 ppb, 12% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Lead and Copper Rule MONITORING AND REPORTING — TT 2025 Unaddressed
Consumer Confidence Rule OTHER — — 2025 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2020 Resolved
TTHM MCL EXCEEDANCE 0.093 MG/L 0.080 mg/L 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.069 MG/L 0.060 mg/L 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.067 MG/L 0.060 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.087 MG/L 0.080 mg/L 2016 Resolved
Public Notice OTHER — — 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

9 violations are on record since 2015, of which 4 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility City Of Jacksboro
PWSID TX1190002
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 4,178
Service connections 1,864
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Jacksboro tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.80 ppb, 12% of the action level.
Does Jacksboro water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Jacksboro? ▼
City Of Jacksboro (PWSID TX1190002). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2022-12-15. No significant deficiencies were recorded.

What Should Jacksboro Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas

Bryson, Tx Tap Water Quality 2026 Jack Perrin, Tx Tap Water Quality 2026 Jack