States ›Texas ›Fort Bend County ›Mission Bend

Mission Bend, TX Tap Water Quality 2026

Water quality report for Mission Bend, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Mission Bend's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Chelford City Mud PWSID: TX1010782 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

A

Mission Bend earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level
PFAS tested, none detected
No violations since 2015
No violations currently open
Mission Bend's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 83% of Texas utilities
Population Served
9603
~8274 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Chelford City Mud
PWSID TX1010782
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 9,603
Service connections 8,274
Systems serving this area 7
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Mission Bend tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Mission Bend water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Mission Bend? ▼
Chelford City Mud (PWSID TX1010782), one of 7 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-05-15. No significant deficiencies were recorded.

What Should Mission Bend Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas

Sugar Land, Tx Tap Water Quality 2026 Fort Bend Rosenberg, Tx Tap Water Quality 2026 Fort Bend Stafford, Tx Tap Water Quality 2026 Fort Bend Fulshear, Tx Tap Water Quality 2026 Fort Bend Pecan Grove, Tx Tap Water Quality 2026 Fort Bend Richmond, Tx Tap Water Quality 2026 Fort Bend