States ›Texas ›Bailey County ›Muleshoe

Muleshoe, TX Tap Water Quality 2026

Water quality report for Muleshoe, TX — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Muleshoe's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Muleshoe Municipal Water System PWSID: TX0090001 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.77 ppb, 12% of the action level and no violations are open. No PFAS was detected.

A

Muleshoe earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.77 ppb — 12% of the federal action level
PFAS tested, none detected
7 violations since 2015, 0 health-based
No violations currently open
Muleshoe's lead level vs. all Texas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.77 ppb — 12% of the federal action level
✓ Lower lead than 44% of Texas utilities
Population Served
5154
~2012 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
7 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
12% of EPA action level
1.77 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.77 ppb, 12% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2018 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2018 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2018 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2017 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2017 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2016 Resolved
E. COLI MONITORING AND REPORTING — 0 2016 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

7 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Muleshoe Municipal Water System
PWSID TX0090001
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 5,154
Service connections 2,012
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Muleshoe tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.77 ppb, 12% of the action level.
Does Muleshoe water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Muleshoe? ▼
Muleshoe Municipal Water System (PWSID TX0090001). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2024-06-04. No significant deficiencies were recorded.

What Should Muleshoe Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Texas