States ›South Dakota ›Yankton County ›Jamesville Colony

Jamesville Colony, SD Tap Water Quality 2026

Water quality report for Jamesville Colony, SD — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Jamesville Colony's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: By Water District PWSID: SD4600865 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

A

Jamesville Colony earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level
PFAS tested, none detected
2 violations since 2015, 2 health-based
No violations currently open
Jamesville Colony's lead level vs. all South Dakota community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 96% of South Dakota utilities
Population Served
110
~5328 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Interim Enhanced Surface Water Treatment Rule TREATMENT TECHNIQUE — — 2019 Resolved
Interim Enhanced Surface Water Treatment Rule TREATMENT TECHNIQUE — — 2019 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 2 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility By Water District
PWSID SD4600865
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 110
Service connections 5,328
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Jamesville Colony tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Jamesville Colony water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Jamesville Colony? ▼
By Water District (PWSID SD4600865). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-06-04. No significant deficiencies were recorded.

What Should Jamesville Colony Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in South Dakota

Yankton, Sd Tap Water Quality 2026 Yankton Gayville, Sd Tap Water Quality 2026 Yankton Mission Hill, Sd Tap Water Quality 2026 Yankton Lesterville, Sd Tap Water Quality 2026 Yankton Volin, Sd Tap Water Quality 2026 Yankton Utica, Sd Tap Water Quality 2026 Yankton