States ›Pennsylvania ›Clarion County ›Washington

Washington, PA Tap Water Quality 2026

Water quality report for Washington, PA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Washington's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Fryburg Water Company PWSID: PA6160030 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 4.10 ppb, 27% of the action level and no violations are open. PFAS has never been sampled at this system.

B

Washington earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 4.10 ppb — 27% of the federal action level
PFAS never sampled at this system
13 violations since 2015, 1 health-based
No violations currently open
Washington's lead level vs. all Pennsylvania community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 4.10 ppb — 27% of the federal action level
✓ Lower lead than 37% of Pennsylvania utilities
Population Served
785
~183 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
13 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
27% of EPA action level
4.10 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
151.2% of EPA action level
1,965 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 4.10 ppb, 27% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Groundwater Rule TREATMENT TECHNIQUE — — 2024 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2024 Resolved
Groundwater Rule MONITORING AND REPORTING — — 2024 Resolved
Endrin MONITORING AND REPORTING — 0.002 mg/L 2018 Resolved
BHC-GAMMA MONITORING AND REPORTING — 0.0002 mg/L 2018 Resolved
Methoxychlor MONITORING AND REPORTING — 0.04 mg/L 2018 Resolved
Toxaphene MONITORING AND REPORTING — 0.003 mg/L 2018 Resolved
Hexachlorocyclopentadiene MONITORING AND REPORTING — 0.05 mg/L 2018 Resolved
LASSO MONITORING AND REPORTING — — 2018 Resolved
Heptachlor MONITORING AND REPORTING — 0.0004 mg/L 2018 Resolved
Heptachlor epoxide MONITORING AND REPORTING — 0.0002 mg/L 2018 Resolved
HEXACHLOROBENZENE MONITORING AND REPORTING — 0.001 mg/L 2018 Resolved
Chlordane MONITORING AND REPORTING — 0.002 mg/L 2018 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

13 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Fryburg Water Company
PWSID PA6160030
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 785
Service connections 183
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Washington tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 4.10 ppb, 27% of the action level.
Does Washington water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Washington? ▼
Fryburg Water Company (PWSID PA6160030), one of 3 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2026-06-12. No significant deficiencies were recorded.

What Should Washington Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Pennsylvania

Clarion, Pa Tap Water Quality 2026 Clarion Clarion, Pa Tap Water Quality 2026 Clarion Knox, Pa Tap Water Quality 2026 Clarion Paint, Pa Tap Water Quality 2026 Clarion Marianne, Pa Tap Water Quality 2026 Clarion Monroe, Pa Tap Water Quality 2026 Clarion