States ›Oklahoma ›Sequoyah County ›Roland

Roland, OK Tap Water Quality 2026

Water quality report for Roland, OK — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Roland's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Roland PWSID: OK1020212 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Roland earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
4 violations since 2015, 2 health-based
No violations currently open
Roland's lead level vs. all Oklahoma community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Oklahoma utilities
Population Served
3260
~1529 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
4 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Nitrate-Nitrite MONITORING AND REPORTING — — 2025 Archived
TTHM MCL EXCEEDANCE 0.085 MG/L 0.080 mg/L 2017 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.061 MG/L 0.060 mg/L 2017 Resolved
Interim Enhanced Surface Water Treatment Rule MONITORING AND REPORTING — — 2016 Archived
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

4 violations are on record since 2015, of which 2 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Roland
PWSID OK1020212
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 3,260
Service connections 1,529
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Roland tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Roland water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Roland? ▼
Roland (PWSID OK1020212), one of 2 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-08-18. No significant deficiencies were recorded.

What Should Roland Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Oklahoma

Sallisaw, Ok Tap Water Quality 2026 Sequoyah Muldrow, Ok Tap Water Quality 2026 Sequoyah Vian, Ok Tap Water Quality 2026 Sequoyah Gore, Ok Tap Water Quality 2026 Sequoyah Brushy, Ok Tap Water Quality 2026 Sequoyah Brent, Ok Tap Water Quality 2026 Sequoyah