States ›Oklahoma ›Rogers County ›Sequoyah

Sequoyah, OK Tap Water Quality 2026

Water quality report for Sequoyah, OK — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Sequoyah's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Rogers Co Rwd # 2 PWSID: OK3006603 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Sequoyah earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
29 violations since 2015, 27 health-based
No violations currently open
Sequoyah's lead level vs. all Oklahoma community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Oklahoma utilities
Population Served
490
~1334 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
29 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2023 Resolved
TTHM MCL EXCEEDANCE 0.081 MG/L 0.080 mg/L 2023 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.085 MG/L 0.080 mg/L 2022 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.063 MG/L 0.060 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.088 MG/L 0.080 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.094 MG/L 0.080 mg/L 2022 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.066 MG/L 0.060 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.104 MG/L 0.080 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.094 MG/L 0.080 mg/L 2022 Resolved
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2022 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2021 Resolved
TTHM MCL EXCEEDANCE 0.081 MG/L 0.080 mg/L 2020 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.063 MG/L 0.060 mg/L 2019 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.063 MG/L 0.060 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.083 MG/L 0.080 mg/L 2019 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.068 MG/L 0.060 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.086 MG/L 0.080 mg/L 2019 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.067 MG/L 0.060 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2017 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.095 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.108 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.085 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.089 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.11 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.093 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

29 violations are on record since 2015, of which 27 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Rogers Co Rwd # 2
PWSID OK3006603
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 490
Service connections 1,334
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Sequoyah tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Sequoyah water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Sequoyah? ▼
Rogers Co Rwd # 2 (PWSID OK3006603), one of 3 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2025-11-05. No significant deficiencies were recorded.

What Should Sequoyah Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Oklahoma

Claremore, Ok Tap Water Quality 2026 Rogers Catoosa, Ok Tap Water Quality 2026 Rogers Verdigris, Ok Tap Water Quality 2026 Rogers Chelsea, Ok Tap Water Quality 2026 Rogers Inola, Ok Tap Water Quality 2026 Rogers Justice, Ok Tap Water Quality 2026 Rogers