States ›Oklahoma ›Atoka County ›Caney

Caney, OK Tap Water Quality 2026

Water quality report for Caney, OK — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Caney's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Atoka Co. Rwd #3 (caney) PWSID: OK2000302 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.66 ppb, 11% of the action level and no violations are open. PFAS has never been sampled at this system.

C

Caney earns a C for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 1.66 ppb — 11% of the federal action level
PFAS never sampled at this system
30 violations since 2015, 1 health-based
No violations currently open
Caney's lead level vs. all Oklahoma community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.66 ppb — 11% of the federal action level
✓ Lower lead than 60% of Oklahoma utilities
Population Served
185
~664 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
30 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
11% of EPA action level
1.66 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
152.3% of EPA action level
1,980 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 1.66 ppb, 11% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Consumer Confidence Rule OTHER — — 2025 Unaddressed
LEAD AND COPPER RULE REVISIONS TREATMENT TECHNIQUE — — 2024 Resolved
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2024 Resolved
Consumer Confidence Rule OTHER — — 2022 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2021 Resolved
Nitrate-Nitrite MONITORING AND REPORTING — — 2021 Resolved
Nitrate-Nitrite MONITORING AND REPORTING — — 2021 Resolved
Nitrate-Nitrite MONITORING AND REPORTING — — 2021 Resolved
Diquat MONITORING AND REPORTING — 0.02 mg/L 2019 Resolved
Diquat MONITORING AND REPORTING — 0.02 mg/L 2019 Resolved
Picloram MONITORING AND REPORTING — 0.5 mg/L 2019 Resolved
Nitrate-Nitrite MONITORING AND REPORTING — — 2019 Resolved
Nitrate-Nitrite MONITORING AND REPORTING — — 2019 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2018 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2017 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2017 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2017 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2017 Resolved
Barium MONITORING AND REPORTING — 2 mg/L 2017–2019 Resolved
Cadmium MONITORING AND REPORTING — 0.005 mg/L 2017–2019 Resolved
Chromium MONITORING AND REPORTING — 0.1 mg/L 2017–2019 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2017–2019 Resolved
Mercury MONITORING AND REPORTING — 0.002 mg/L 2017–2019 Resolved
Nickel MONITORING AND REPORTING — — 2017–2019 Resolved
Antimony, Total MONITORING AND REPORTING — 0.006 mg/L 2017–2019 Resolved
Beryllium, Total MONITORING AND REPORTING — 0.004 mg/L 2017–2019 Resolved
Thallium, Total MONITORING AND REPORTING — 0.002 mg/L 2017–2019 Resolved
Selenium MONITORING AND REPORTING — 0.05 mg/L 2017–2019 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2016–2017 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2016–2017 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

30 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Atoka Co. Rwd #3 (Caney)
PWSID OK2000302
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 185
Service connections 664
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Caney tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.66 ppb, 11% of the action level.
Does Caney water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Caney? ▼
Atoka Co. Rwd #3 (Caney) (PWSID OK2000302). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-02-04. Inspectors recorded 2 significant deficiencies.

What Should Caney Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Oklahoma

Atoka, Ok Tap Water Quality 2026 Atoka Tushka, Ok Tap Water Quality 2026 Atoka Stringtown, Ok Tap Water Quality 2026 Atoka Lane, Ok Tap Water Quality 2026 Atoka Wardville, Ok Tap Water Quality 2026 Atoka Bentley, Ok Tap Water Quality 2026 Atoka