States ›New York ›Yates County ›Milo

Milo, NY Tap Water Quality 2026

Water quality report for Milo, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Milo's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Penn Yan Village PWSID: NY6101263 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.50 ppb, 10% of the action level and no violations are open. No PFAS was detected.

A

Milo earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.50 ppb — 10% of the federal action level
PFAS tested, none detected
42 violations since 2015, 0 health-based
No violations currently open
Milo's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.50 ppb — 10% of the federal action level
✓ Lower lead than 74% of New York utilities
Population Served
4283
~2240 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
42 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
10% of EPA action level
1.50 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
114.2% of EPA action level
1,484 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 1.50 ppb, 10% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2024 Unaddressed
Interim Enhanced Surface Water Treatment Rule MONITORING AND REPORTING — — 2021 Archived
Endrin MONITORING AND REPORTING — 0.002 mg/L 2021–2022 Resolved
BHC-GAMMA MONITORING AND REPORTING — 0.0002 mg/L 2021–2022 Resolved
Methoxychlor MONITORING AND REPORTING — 0.04 mg/L 2021–2022 Resolved
Toxaphene MONITORING AND REPORTING — 0.003 mg/L 2021–2022 Resolved
Dalapon MONITORING AND REPORTING — 0.2 mg/L 2021–2022 Resolved
Di(2-ethylhexyl) adipate MONITORING AND REPORTING — 0.4 mg/L 2021–2022 Resolved
OXAMYL MONITORING AND REPORTING — 0.2 mg/L 2021–2022 Resolved
Simazine MONITORING AND REPORTING — 0.004 mg/L 2021–2022 Resolved
Di(2-ethylhexyl) phthalate MONITORING AND REPORTING — 0.006 mg/L 2021–2022 Resolved
Picloram MONITORING AND REPORTING — 0.5 mg/L 2021–2022 Resolved
Dinoseb MONITORING AND REPORTING — 0.007 mg/L 2021–2022 Resolved
Hexachlorocyclopentadiene MONITORING AND REPORTING — 0.05 mg/L 2021–2022 Resolved
Aldicarb sulfoxide MONITORING AND REPORTING — — 2021–2022 Resolved
Aldicarb sulfone MONITORING AND REPORTING — — 2021–2022 Resolved
Carbofuran MONITORING AND REPORTING — 0.04 mg/L 2021–2022 Resolved
Aldicarb MONITORING AND REPORTING — — 2021–2022 Resolved
Atrazine MONITORING AND REPORTING — 0.003 mg/L 2021–2022 Resolved
LASSO MONITORING AND REPORTING — — 2021–2022 Resolved
Heptachlor MONITORING AND REPORTING — 0.0004 mg/L 2021–2022 Resolved
Heptachlor epoxide MONITORING AND REPORTING — 0.0002 mg/L 2021–2022 Resolved
2,4-D MONITORING AND REPORTING — 0.07 mg/L 2021–2022 Resolved
2,4,5-TP MONITORING AND REPORTING — 0.05 mg/L 2021–2022 Resolved
HEXACHLOROBENZENE MONITORING AND REPORTING — 0.001 mg/L 2021–2022 Resolved
Benzo(a)pyrene MONITORING AND REPORTING — 0.0002 mg/L 2021–2022 Resolved
Pentachlorophenol MONITORING AND REPORTING — 0.001 mg/L 2021–2022 Resolved
Total Polychlorinated Biphenyls (PCB) MONITORING AND REPORTING — 0.0005 mg/L 2021–2022 Resolved
ETHYLENE DIBROMIDE MONITORING AND REPORTING — 0.00005 mg/L 2021–2022 Resolved
Chlordane MONITORING AND REPORTING — 0.002 mg/L 2021–2022 Resolved
Arsenic MONITORING AND REPORTING — 0.010 mg/L 2018 Resolved
Barium MONITORING AND REPORTING — 2 mg/L 2018 Resolved
Cadmium MONITORING AND REPORTING — 0.005 mg/L 2018 Resolved
Chromium MONITORING AND REPORTING — 0.1 mg/L 2018 Resolved
CYANIDE MONITORING AND REPORTING — 0.2 mg/L 2018 Resolved
Fluoride MONITORING AND REPORTING — 4.0 mg/L 2018 Resolved
Mercury MONITORING AND REPORTING — 0.002 mg/L 2018 Resolved
Nickel MONITORING AND REPORTING — — 2018 Resolved
Antimony, Total MONITORING AND REPORTING — 0.006 mg/L 2018 Resolved
Beryllium, Total MONITORING AND REPORTING — 0.004 mg/L 2018 Resolved
Thallium, Total MONITORING AND REPORTING — 0.002 mg/L 2018 Resolved
Selenium MONITORING AND REPORTING — 0.05 mg/L 2018 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

42 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Penn Yan Village
PWSID NY6101263
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 4,283
Service connections 2,240
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Milo tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.50 ppb, 10% of the action level.
Does Milo water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Milo? ▼
Penn Yan Village (PWSID NY6101263), one of 3 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2024-11-25. No significant deficiencies were recorded.

What Should Milo Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Penn Yan, Ny Tap Water Quality 2026 Yates Starkey, Ny Tap Water Quality 2026 Yates Jerusalem, Ny Tap Water Quality 2026 Yates Benton, Ny Tap Water Quality 2026 Yates Rushville, Ny Tap Water Quality 2026 Yates Potter, Ny Tap Water Quality 2026 Yates