States ›New York ›Oneida County ›Rome

Rome, NY Tap Water Quality 2026

Water quality report for Rome, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Rome's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Rome City PWSID: NY3202405 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 5.00 ppb, 33% of the action level and no violations are open. No PFAS was detected.

B

Rome earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 5.00 ppb — 33% of the federal action level
PFAS tested, none detected
1 violations since 2015, 0 health-based
No violations currently open
Rome's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 5.00 ppb — 33% of the federal action level
✓ Lower lead than 24% of New York utilities
Population Served
27635
~10013 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
1 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
33% of EPA action level
5.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 5.00 ppb, 33% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule MONITORING FAILURE — — 2016 Archived
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

1 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Rome City
PWSID NY3202405
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 27,635
Service connections 10,013
Systems serving this area 7
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Rome tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 5.00 ppb, 33% of the action level.
Does Rome water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Rome? ▼
Rome City (PWSID NY3202405), one of 7 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2024-06-27. Inspectors recorded 1 significant deficiency.

What Should Rome Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Utica, Ny Tap Water Quality 2026 Oneida New Hartford, Ny Tap Water Quality 2026 Oneida Whitestown, Ny Tap Water Quality 2026 Oneida Marcy, Ny Tap Water Quality 2026 Oneida Vienna, Ny Tap Water Quality 2026 Oneida Deerfield, Ny Tap Water Quality 2026 Oneida