States ›New York ›Fulton County ›Gloversville

Gloversville, NY Tap Water Quality 2026

Water quality report for Gloversville, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Gloversville's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Gloversville (c) Water Works PWSID: NY1700018 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 7.90 ppb, 53% of the action level and no violations are open. No PFAS was detected.

A

Gloversville earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 7.90 ppb — 53% of the federal action level
PFAS tested, none detected
No violations since 2015
No violations currently open
Gloversville's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 7.90 ppb — 53% of the federal action level
✓ Lower lead than 9% of New York utilities
Population Served
15115
~6751 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
53% of EPA action level
7.90 ppb
Action level: 15 ppb
The 90th-percentile lead result is 7.90 ppb, 53% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Gloversville (C) Water Works
PWSID NY1700018
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 15,115
Service connections 6,751
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Gloversville tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 7.90 ppb, 53% of the action level.
Does Gloversville water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Gloversville? ▼
Gloversville (C) Water Works (PWSID NY1700018), one of 2 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2023-11-01. No significant deficiencies were recorded.

What Should Gloversville Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Johnstown, Ny Tap Water Quality 2026 Fulton Johnstown, Ny Tap Water Quality 2026 Fulton Broadalbin, Ny Tap Water Quality 2026 Fulton Broadalbin, Ny Tap Water Quality 2026 Fulton Northampton, Ny Tap Water Quality 2026 Fulton Mayfield, Ny Tap Water Quality 2026 Fulton