States ›New York ›Franklin County ›Bellmont

Bellmont, NY Tap Water Quality 2026

Water quality report for Bellmont, NY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Bellmont's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Brainardsville Wd PWSID: NY1600003 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. PFAS has never been sampled at this system.

B

Bellmont earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 1.00 ppb — 7% of the federal action level
PFAS never sampled at this system
6 violations since 2015, 0 health-based
No violations currently open
Bellmont's lead level vs. all New York community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 96% of New York utilities
Population Served
13
~45 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
6 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
103.8% of EPA action level
1,350 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule MONITORING FAILURE — — 2026 Resolved
Nitrate MONITORING AND REPORTING — 10 mg/L 2023 Archived
TTHM MONITORING AND REPORTING — 0.080 mg/L 2019 Archived
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2019 Archived
TTHM MONITORING AND REPORTING — 0.080 mg/L 2015–2017 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2015–2017 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

6 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Brainardsville Wd
PWSID NY1600003
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 13
Service connections 45
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Bellmont tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Bellmont water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Bellmont? ▼
Brainardsville Wd (PWSID NY1600003), one of 2 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-08-12. Inspectors recorded 1 significant deficiency.

What Should Bellmont Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in New York

Malone, Ny Tap Water Quality 2026 Franklin Tupper Lake, Ny Tap Water Quality 2026 Franklin Saranac Lake, Ny Tap Water Quality 2026 Franklin Harrietstown, Ny Tap Water Quality 2026 Franklin Chateaugay, Ny Tap Water Quality 2026 Franklin Fort Covington, Ny Tap Water Quality 2026 Franklin