States ›Nebraska ›Furnas County ›Beaver City

Beaver City, NE Tap Water Quality 2026

Water quality report for Beaver City, NE — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Beaver City's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Beaver City, City Of PWSID: NE3106505 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 14.40 ppb, 96% of the action level and no violations are open. No PFAS was detected.

B

Beaver City earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 14.40 ppb — 96% of the federal action level
PFAS tested, none detected
No violations since 2015
No violations currently open
Beaver City's lead level vs. all Nebraska community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 14.40 ppb — 96% of the federal action level
✓ Lower lead than 1% of Nebraska utilities
Population Served
523
~328 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
96% of EPA action level
14.40 ppb
Action level: 15 ppb
The 90th-percentile lead result is 14.40 ppb, 96% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Beaver City, City Of
PWSID NE3106505
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 523
Service connections 328
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Beaver City tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 14.40 ppb, 96% of the action level.
Does Beaver City water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Beaver City? ▼
Beaver City, City Of (PWSID NE3106505). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2023-06-06. Inspectors recorded 1 significant deficiency.

What Should Beaver City Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Nebraska

Cambridge, Ne Tap Water Quality 2026 Furnas Arapahoe, Ne Tap Water Quality 2026 Furnas Oxford, Ne Tap Water Quality 2026 Furnas Holbrook, Ne Tap Water Quality 2026 Furnas Edison, Ne Tap Water Quality 2026 Furnas Wilsonville, Ne Tap Water Quality 2026 Furnas