States ›North Carolina ›Brunswick County ›Belville

Belville, NC Tap Water Quality 2026

Water quality report for Belville, NC — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Belville's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Brunswick Regional Water And Sewer H2go PWSID: NC0410070 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. No PFAS was detected.

A

Belville earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: not detected
PFAS tested, none detected
3 violations since 2015, 1 health-based
No violations currently open
Belville's lead level vs. all North Carolina community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of North Carolina utilities
Population Served
1899
~18011 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule REPORTING FAILURE — — 2025 Resolved
LEAD AND COPPER RULE REVISIONS TREATMENT TECHNIQUE — — 2024 Resolved
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2024 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Brunswick Regional Water And Sewer H2go
PWSID NC0410070
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 1,899
Service connections 18,011
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Belville tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Belville water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Belville? ▼
Brunswick Regional Water And Sewer H2go (PWSID NC0410070), one of 2 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2026-05-08. No significant deficiencies were recorded.

What Should Belville Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in North Carolina

Leland, Nc Tap Water Quality 2026 Brunswick Oak Island, Nc Tap Water Quality 2026 Brunswick St. James, Nc Tap Water Quality 2026 Brunswick Sunset Beach, Nc Tap Water Quality 2026 Brunswick Southport, Nc Tap Water Quality 2026 Brunswick Calabash, Nc Tap Water Quality 2026 Brunswick