States ›Montana ›Ravalli County ›Pinesdale

Pinesdale, MT Tap Water Quality 2026

Water quality report for Pinesdale, MT — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Pinesdale's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Pinesdale Town Of PWSID: MT0002926 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

B

Pinesdale earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level
PFAS tested, none detected
5 violations since 2015, 5 health-based
No violations currently open
Pinesdale's lead level vs. all Montana community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 99% of Montana utilities
Population Served
382
~137 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
5 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 84 UG/L 0.060 mg/L 2016 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 98.3 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 102.3 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 79.3 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.0715 MG/L 0.060 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

5 violations are on record since 2015, of which 5 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Pinesdale Town Of
PWSID MT0002926
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 382
Service connections 137
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Pinesdale tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Pinesdale water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Pinesdale? ▼
Pinesdale Town Of (PWSID MT0002926). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2023-11-16. No significant deficiencies were recorded.

What Should Pinesdale Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Montana

Hamilton, Mt Tap Water Quality 2026 Ravalli Stevensville, Mt Tap Water Quality 2026 Ravalli Darby, Mt Tap Water Quality 2026 Ravalli Florence, Mt Tap Water Quality 2026 Ravalli Victor, Mt Tap Water Quality 2026 Ravalli Corvallis, Mt Tap Water Quality 2026 Ravalli