States ›Montana ›Cascade County ›Great Falls

Great Falls, MT Tap Water Quality 2026

Water quality report for Great Falls, MT — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Great Falls's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Great Falls City Of PWSID: MT0000525 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 12.00 ppb, 80% of the action level and no violations are open. No PFAS was detected.

B

Great Falls earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 12.00 ppb — 80% of the federal action level
PFAS tested, none detected
5 violations since 2015, 5 health-based
No violations currently open
Great Falls's lead level vs. all Montana community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 12.00 ppb — 80% of the federal action level
✓ Lower lead than 6% of Montana utilities
Population Served
60026
~22477 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
5 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
80% of EPA action level
12.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 12.00 ppb, 80% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 61 UG/L 0.060 mg/L 2019 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 72.5 UG/L 0.060 mg/L 2019 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 74.8 UG/L 0.060 mg/L 2018 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 73.8 UG/L 0.060 mg/L 2018 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 60.5 UG/L 0.060 mg/L 2018 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

5 violations are on record since 2015, of which 5 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Great Falls City Of
PWSID MT0000525
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 60,026
Service connections 22,477
Systems serving this area 9
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Great Falls tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 12.00 ppb, 80% of the action level.
Does Great Falls water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Great Falls? ▼
Great Falls City Of (PWSID MT0000525), one of 9 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-04-11. No significant deficiencies were recorded.

What Should Great Falls Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Montana

Malmstrom AFB, Mt Tap Water Quality 2026 Cascade Sun Prairie, Mt Tap Water Quality 2026 Cascade Black Eagle, Mt Tap Water Quality 2026 Cascade Cascade, Mt Tap Water Quality 2026 Cascade Belt, Mt Tap Water Quality 2026 Cascade Vaughn, Mt Tap Water Quality 2026 Cascade