States ›Missouri ›New Madrid County ›Matthews

Matthews, MO Tap Water Quality 2026

Water quality report for Matthews, MO — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Matthews's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Matthews Pws PWSID: MO4010509 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 3.28 ppb, 22% of the action level and no violations are open. PFAS has never been sampled at this system.

B

Matthews earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 3.28 ppb — 22% of the federal action level
PFAS never sampled at this system
4 violations since 2015, 0 health-based
No violations currently open
Matthews's lead level vs. all Missouri community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 3.28 ppb — 22% of the federal action level
✓ Lower lead than 31% of Missouri utilities
Population Served
515
~273 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
4 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
22% of EPA action level
3.28 ppb
Action level: 15 ppb
The 90th-percentile lead result is 3.28 ppb, 22% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2025 Unaddressed
Lead and Copper Rule MONITORING AND REPORTING — TT 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2023 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

4 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Matthews Pws
PWSID MO4010509
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 515
Service connections 273
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Matthews tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 3.28 ppb, 22% of the action level.
Does Matthews water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Matthews? ▼
Matthews Pws (PWSID MO4010509), one of 2 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-01-28. No significant deficiencies were recorded.

What Should Matthews Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Missouri

Portageville, Mo Tap Water Quality 2026 New Madrid New Madrid, Mo Tap Water Quality 2026 New Madrid Lilbourn, Mo Tap Water Quality 2026 New Madrid Morehouse, Mo Tap Water Quality 2026 New Madrid Parma, Mo Tap Water Quality 2026 New Madrid Marston, Mo Tap Water Quality 2026 New Madrid