States ›Missouri ›Bates County ›Adrian

Adrian, MO Tap Water Quality 2026

Water quality report for Adrian, MO — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Adrian's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Adrian Pws PWSID: MO1010001 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Adrian earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
36 violations since 2015, 7 health-based
No violations currently open
Adrian's lead level vs. all Missouri community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Missouri utilities
Population Served
1723
~731 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
36 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2025 Unaddressed
Surface Water Treatment Rule MONITORING AND REPORTING — — 2025 Resolved
Interim Enhanced Surface Water Treatment Rule MONITORING AND REPORTING — — 2025 Resolved
Interim Enhanced Surface Water Treatment Rule MONITORING AND REPORTING — — 2025 Resolved
Simazine MONITORING AND REPORTING — 0.004 mg/L 2025 Resolved
Atrazine MONITORING AND REPORTING — 0.003 mg/L 2025 Resolved
LASSO MONITORING AND REPORTING — — 2025 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2024 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2023 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2021 Resolved
TTHM MCL EXCEEDANCE 86 UG/L 0.080 mg/L 2021 Resolved
TTHM MCL EXCEEDANCE 90 UG/L 0.080 mg/L 2021 Resolved
Simazine MONITORING AND REPORTING — 0.004 mg/L 2021 Resolved
Atrazine MONITORING AND REPORTING — 0.003 mg/L 2021 Resolved
LASSO MONITORING AND REPORTING — — 2021 Resolved
Public Notice OTHER — — 2021 Resolved
Public Notice OTHER — — 2020 Resolved
Consumer Confidence Rule OTHER — — 2020 Resolved
Interim Enhanced Surface Water Treatment Rule TREATMENT TECHNIQUE — — 2020 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2020 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2020 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2020 Resolved
Consumer Confidence Rule OTHER — — 2019 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2018 Resolved
Public Notice OTHER — — 2016 Resolved
Public Notice OTHER — — 2015 Resolved
TTHM MCL EXCEEDANCE 87 UG/L 0.080 mg/L 2015 Resolved
Public Notice OTHER — — 2015 Resolved
Public Notice OTHER — — 2015 Resolved
TTHM MCL EXCEEDANCE 96 UG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 98.63 UG/L 0.080 mg/L 2015 Resolved
Public Notice OTHER — — 2015 Resolved
TTHM MCL EXCEEDANCE 109.51 UG/L 0.080 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

36 violations are on record since 2015, of which 7 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Adrian Pws
PWSID MO1010001
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 1,723
Service connections 731
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Adrian tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Adrian water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Adrian? ▼
Adrian Pws (PWSID MO1010001), one of 2 systems serving this area. Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2024-04-17. No significant deficiencies were recorded.

What Should Adrian Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Missouri

Butler, Mo Tap Water Quality 2026 Bates Rich Hill, Mo Tap Water Quality 2026 Bates Hume, Mo Tap Water Quality 2026 Bates Amsterdam, Mo Tap Water Quality 2026 Bates Amoret, Mo Tap Water Quality 2026 Bates Rockville, Mo Tap Water Quality 2026 Bates