States ›Minnesota ›Anoka County ›Anoka

Anoka, MN Tap Water Quality 2026

Water quality report for Anoka, MN — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Anoka's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Anoka PWSID: MN1020001 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 2.00 ppb, 13% of the action level and no violations are open. No PFAS was detected.

A

Anoka earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 2.00 ppb — 13% of the federal action level
PFAS tested, none detected
14 violations since 2015, 0 health-based
No violations currently open
Anoka's lead level vs. all Minnesota community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 2.00 ppb — 13% of the federal action level
✓ Lower lead than 83% of Minnesota utilities
Population Served
17766
~5264 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
14 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
13% of EPA action level
2.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 2.00 ppb, 13% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Endrin MONITORING AND REPORTING — 0.002 mg/L 2020–2022 Archived
BHC-GAMMA MONITORING AND REPORTING — 0.0002 mg/L 2020–2022 Archived
Methoxychlor MONITORING AND REPORTING — 0.04 mg/L 2020–2022 Archived
Di(2-ethylhexyl) adipate MONITORING AND REPORTING — 0.4 mg/L 2020–2022 Archived
Simazine MONITORING AND REPORTING — 0.004 mg/L 2020–2022 Archived
Di(2-ethylhexyl) phthalate MONITORING AND REPORTING — 0.006 mg/L 2020–2022 Archived
Hexachlorocyclopentadiene MONITORING AND REPORTING — 0.05 mg/L 2020–2022 Archived
Atrazine MONITORING AND REPORTING — 0.003 mg/L 2020–2022 Archived
LASSO MONITORING AND REPORTING — — 2020–2022 Archived
Heptachlor MONITORING AND REPORTING — 0.0004 mg/L 2020–2022 Archived
Heptachlor epoxide MONITORING AND REPORTING — 0.0002 mg/L 2020–2022 Archived
HEXACHLOROBENZENE MONITORING AND REPORTING — 0.001 mg/L 2020–2022 Archived
Benzo(a)pyrene MONITORING AND REPORTING — 0.0002 mg/L 2020–2022 Archived
Lead and Copper Rule MONITORING AND REPORTING — TT 2017 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

14 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Anoka
PWSID MN1020001
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 17,766
Service connections 5,264
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Anoka tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 2.00 ppb, 13% of the action level.
Does Anoka water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Anoka? ▼
Anoka (PWSID MN1020001), one of 3 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-07-08. No significant deficiencies were recorded.

What Should Anoka Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Minnesota

Blaine, Mn Tap Water Quality 2026 Anoka Coon Rapids, Mn Tap Water Quality 2026 Anoka Fridley, Mn Tap Water Quality 2026 Anoka Andover, Mn Tap Water Quality 2026 Anoka Columbia Heights, Mn Tap Water Quality 2026 Anoka Lino Lakes, Mn Tap Water Quality 2026 Anoka