States ›Michigan ›Menominee County ›Harris

Harris, MI Tap Water Quality 2026

Water quality report for Harris, MI — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Harris's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Hannahville Community PWSID: 055293611 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

A

Harris earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level
PFAS tested, none detected
2 violations since 2015, 0 health-based
No violations currently open
Harris's lead level vs. all Michigan community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 95% of Michigan utilities
Population Served
107
~228 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule REPORTING FAILURE — — 2020 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2020 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Hannahville Community
PWSID 055293611
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 107
Service connections 228
Systems serving this area 1
Regulator US EPA (tribal primacy)
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Harris tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Harris water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Harris? ▼
Hannahville Community (PWSID 055293611). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2026-03-31. Inspectors recorded 1 significant deficiency.

What Should Harris Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Michigan

Menominee, Mi Tap Water Quality 2026 Menominee Stephenson, Mi Tap Water Quality 2026 Menominee Spalding, Mi Tap Water Quality 2026 Menominee Meyer, Mi Tap Water Quality 2026 Menominee Nadeau, Mi Tap Water Quality 2026 Menominee Menominee, Mi Tap Water Quality 2026 Menominee