States ›Michigan ›Kent County ›Cedar Springs

Cedar Springs, MI Tap Water Quality 2026

Water quality report for Cedar Springs, MI — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Cedar Springs's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Cedar Springs PWSID: MI0001260 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.15 ppb, 8% of the action level and no violations are open. No PFAS was detected.

A

Cedar Springs earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.15 ppb — 8% of the federal action level
PFAS tested, none detected
3 violations since 2015, 1 health-based
No violations currently open
Cedar Springs's lead level vs. all Michigan community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.15 ppb — 8% of the federal action level
✓ Lower lead than 81% of Michigan utilities
Population Served
3432
~946 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
8% of EPA action level
1.15 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.15 ppb, 8% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Arsenic MCL EXCEEDANCE 0.012 MG/L 0.010 mg/L 2024 Resolved
Coliform (TCR) MONITORING AND REPORTING — 5% of samples 2015 Resolved
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Cedar Springs
PWSID MI0001260
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 3,432
Service connections 946
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Cedar Springs tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.15 ppb, 8% of the action level.
Does Cedar Springs water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Cedar Springs? ▼
Cedar Springs (PWSID MI0001260). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-03-27. No significant deficiencies were recorded.

What Should Cedar Springs Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Michigan

Grand Rapids, Mi Tap Water Quality 2026 Kent Wyoming, Mi Tap Water Quality 2026 Kent Kentwood, Mi Tap Water Quality 2026 Kent Plainfield charter, Mi Tap Water Quality 2026 Kent Gaines charter, Mi Tap Water Quality 2026 Kent Byron, Mi Tap Water Quality 2026 Kent