States ›Maine ›Washington County ›Eastport

Eastport, ME Tap Water Quality 2026

Water quality report for Eastport, ME — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Eastport's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Passamaquoddy Water District PWSID: ME0090510 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 0.80 ppb, 5% of the action level and no violations are open. PFAS has never been sampled at this system.

C

Eastport earns a C for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 0.80 ppb — 5% of the federal action level
PFAS never sampled at this system
8 violations since 2015, 8 health-based
No violations currently open
Eastport's lead level vs. all Maine community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 0.80 ppb — 5% of the federal action level
✓ Lower lead than 94% of Maine utilities
Population Served
1190
~850 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
8 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
5% of EPA action level
0.80 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
139.2% of EPA action level
1,810 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 0.80 ppb, 5% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.088 MG/L 0.080 mg/L 2019 Resolved
TTHM MCL EXCEEDANCE 0.094 MG/L 0.080 mg/L 2018 Resolved
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2018 Resolved
TTHM MCL EXCEEDANCE 0.081 MG/L 0.080 mg/L 2018 Resolved
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2017 Resolved
Coliform (TCR) MCL EXCEEDANCE — 5% of samples 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

8 violations are on record since 2015, of which 8 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Passamaquoddy Water District
PWSID ME0090510
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 1,190
Service connections 850
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Eastport tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 0.80 ppb, 5% of the action level.
Does Eastport water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Eastport? ▼
Passamaquoddy Water District (PWSID ME0090510). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-04-30. No significant deficiencies were recorded.

What Should Eastport Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Maine

Calais, Me Tap Water Quality 2026 Washington Machias, Me Tap Water Quality 2026 Washington Baileyville, Me Tap Water Quality 2026 Washington Lubec, Me Tap Water Quality 2026 Washington Milbridge, Me Tap Water Quality 2026 Washington Harrington, Me Tap Water Quality 2026 Washington