States ›Maryland ›Frederick County ›Adamstown

Adamstown, MD Tap Water Quality 2026

Water quality report for Adamstown, MD — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Adamstown's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: New Design - Frederick County PWSID: MD0100030 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 3.00 ppb, 20% of the action level and no violations are open. No PFAS was detected.

A

Adamstown earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 3.00 ppb — 20% of the federal action level
PFAS tested, none detected
3 violations since 2015, 0 health-based
No violations currently open
Adamstown's lead level vs. all Maryland community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 3.00 ppb — 20% of the federal action level
✓ Lower lead than 35% of Maryland utilities
Population Served
2183
~22869 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
20% of EPA action level
3.00 ppb
Action level: 15 ppb
The 90th-percentile lead result is 3.00 ppb, 20% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Toxaphene MONITORING AND REPORTING — 0.003 mg/L 2023 Resolved
Toxaphene MONITORING AND REPORTING — 0.003 mg/L 2023 Resolved
Gross Alpha, Excl. Radon and U MONITORING AND REPORTING — 15 pCi/L 2016–2024 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility New Design - Frederick County
PWSID MD0100030
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 2,183
Service connections 22,869
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Adamstown tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 3.00 ppb, 20% of the action level.
Does Adamstown water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Adamstown? ▼
New Design - Frederick County (PWSID MD0100030). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-01-14. No significant deficiencies were recorded.

What Should Adamstown Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Maryland

Frederick, Md Tap Water Quality 2026 Frederick Ballenger Creek, Md Tap Water Quality 2026 Frederick Urbana, Md Tap Water Quality 2026 Frederick Linganore, Md Tap Water Quality 2026 Frederick Brunswick, Md Tap Water Quality 2026 Frederick Walkersville, Md Tap Water Quality 2026 Frederick