Gilmore, MD Tap Water Quality 2026

Water quality report for Gilmore, MD — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Gilmore's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Midland-Lonaconing PWSID: MD0010018 Updated: 2026 Q2

✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

Gilmore earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level

PFAS tested, none detected

9 violations since 2015, 2 health-based

No violations currently open

Gilmore's lead level vs. all Maryland community water systems

0 ppb5 ppb10 ppb15 ppb

Lead level: 1.00 ppb — 7% of the federal action level

✓ Lower lead than 92% of Maryland utilities

Population Served

~1450 connections

Water Source

Surface water

Drawn from surface water — SDWIS source code SW

Active Violations

9 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)

90th percentile of tap samples collected across the distribution system

7% of EPA action level

1.00 ppb

Action level: 15 ppb

Copper (Cu)

90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.

169.2% of EPA action level

2,200 ppb

Action level: 1,300 ppb

The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

Contaminant	Type	Measured	Limit	Period	Status
Total Haloacetic Acids (HAA5)	MCL EXCEEDANCE	63 UG/L	0.060 mg/L	2025	Resolved
Interim Enhanced Surface Water Treatment Rule	TREATMENT TECHNIQUE	9 NTU	—	2023	Resolved
Nitrate	MONITORING AND REPORTING	—	10 mg/L	2023	Resolved
Nitrate	MONITORING AND REPORTING	—	10 mg/L	2023	Resolved
Nitrate	MONITORING AND REPORTING	—	10 mg/L	2023	Resolved
Fluoride	MONITORING AND REPORTING	—	4.0 mg/L	2023	Resolved
Fluoride	MONITORING AND REPORTING	—	4.0 mg/L	2023	Resolved
Fluoride	MONITORING AND REPORTING	—	4.0 mg/L	2023	Resolved
Lead and Copper Rule	MONITORING AND REPORTING	—	TT	2018	Resolved

Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

9 violations are on record since 2015, of which 2 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Midland-Lonaconing

PWSID MD0010018

Water source Surface water — Drawn from surface water — SDWIS source code SW

Population served 86

Service connections 1,450

Systems serving this area 1

Regulator State primacy agency

Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Gilmore tap water safe to drink? ▼

No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.

Does Gilmore water have PFAS? ▼

It was tested for the six regulated PFAS compounds and none were detected.

Who supplies water to Gilmore? ▼

Midland-Lonaconing (PWSID MD0010018). Surface water. Drawn from surface water — SDWIS source code SW

When was this system last inspected? ▼

It was last inspected on 2025-09-26. No significant deficiencies were recorded.

What Should Gilmore Residents Do?

Read your annual water report

Your supplier publishes a Consumer Confidence Report each July covering the prior year.

Check for a lead service line

Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.

Flush before drinking

If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Maryland

Cumberland, Md Tap Water Quality 2026 Allegany Frostburg, Md Tap Water Quality 2026 Allegany Cresaptown, Md Tap Water Quality 2026 Allegany La Vale, Md Tap Water Quality 2026 Allegany Westernport, Md Tap Water Quality 2026 Allegany Bel Air, Md Tap Water Quality 2026 Allegany