States ›Kentucky ›Powell County ›Stanton

Stanton, KY Tap Water Quality 2026

Water quality report for Stanton, KY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Stanton's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Stanton Water Works PWSID: KY0990418 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. No PFAS was detected.

A

Stanton earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: not detected
PFAS tested, none detected
8 violations since 2015, 1 health-based
No violations currently open
Stanton's lead level vs. all Kentucky community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Kentucky utilities
Population Served
3189
~2164 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
8 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Public Notice OTHER — — 2025 Unaddressed
Long Term 2 Enhanced Surface Water Treatment Rule OTHER — — 2023 Resolved
Consumer Confidence Rule OTHER — — 2023 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.061 MG/L 0.060 mg/L 2016 Resolved
Public Notice OTHER — — 2015 Resolved
Public Notice OTHER — — 2015 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2015 Resolved
Consumer Confidence Rule OTHER — — 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

8 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Stanton Water Works
PWSID KY0990418
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 3,189
Service connections 2,164
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Stanton tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Stanton water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Stanton? ▼
Stanton Water Works (PWSID KY0990418), one of 2 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2023-06-29. No significant deficiencies were recorded.

What Should Stanton Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kentucky

Clay City, Ky Tap Water Quality 2026 Powell