States ›Kentucky ›Ohio County ›Beaver Dam

Beaver Dam, KY Tap Water Quality 2026

Water quality report for Beaver Dam, KY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Beaver Dam's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Beaver Dam Municipal Water & Sewer PWSID: KY0920025 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. No PFAS was detected.

A

Beaver Dam earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: not detected
PFAS tested, none detected
3 violations since 2015, 1 health-based
No violations currently open
Beaver Dam's lead level vs. all Kentucky community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Kentucky utilities
Population Served
3307
~2067 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Consumer Confidence Rule OTHER — — 2021 Resolved
Revised Total Coliform Rule TREATMENT TECHNIQUE — — 2020 Resolved
Consumer Confidence Rule OTHER — — 2020 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Beaver Dam Municipal Water & Sewer
PWSID KY0920025
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 3,307
Service connections 2,067
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Beaver Dam tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Beaver Dam water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Beaver Dam? ▼
Beaver Dam Municipal Water & Sewer (PWSID KY0920025), one of 3 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2023-10-25. No significant deficiencies were recorded.

What Should Beaver Dam Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kentucky

Hartford, Ky Tap Water Quality 2026 Ohio Pleasant Ridge, Ky Tap Water Quality 2026 Ohio Fordsville, Ky Tap Water Quality 2026 Ohio Centertown, Ky Tap Water Quality 2026 Ohio McHenry, Ky Tap Water Quality 2026 Ohio Rockport, Ky Tap Water Quality 2026 Ohio