States ›Kentucky ›Jefferson County ›St. Matthews

St. Matthews, KY Tap Water Quality 2026

Water quality report for St. Matthews, KY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at St. Matthews's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Louisville Water Company PWSID: KY0560258 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.10 ppb, 7% of the action level and no violations are open. PFAS was detected below the federal limit.

A

St. Matthews earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.10 ppb — 7% of the federal action level
PFAS detected below the federal limit
No violations since 2015
No violations currently open
St. Matthews's lead level vs. all Kentucky community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.10 ppb — 7% of the federal action level
✓ Lower lead than 94% of Kentucky utilities
Population Served
17330
~311310 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
None on record since 2015

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.10 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.10 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

✓ No violations on record for this water system.
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

No violations are on record for this system since 2015. EPA records violations for every community water system, so this reflects a clean compliance history rather than missing data.

About the Main Water System

Utility Louisville Water Company
PWSID KY0560258
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 17,330
Service connections 311,310
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is St. Matthews tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.10 ppb, 7% of the action level.
Does St. Matthews water have PFAS? ▼
PFAS was detected but stayed below the federal limit.
Who supplies water to St. Matthews? ▼
Louisville Water Company (PWSID KY0560258). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2023-10-31. No significant deficiencies were recorded.

What Should St. Matthews Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kentucky

Louisville/Jefferson County metro government (balance), Ky Tap Water Quality 2026 Jefferson Louisville, Ky Tap Water Quality 2026 Jefferson Jeffersontown, Ky Tap Water Quality 2026 Jefferson Shively, Ky Tap Water Quality 2026 Jefferson Lyndon, Ky Tap Water Quality 2026 Jefferson Middletown, Ky Tap Water Quality 2026 Jefferson