States ›Kentucky ›Hopkins County ›Hanson

Hanson, KY Tap Water Quality 2026

Water quality report for Hanson, KY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Hanson's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Hanson Water System PWSID: KY0540656 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Hanson earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
17 violations since 2015, 15 health-based
No violations currently open
Hanson's lead level vs. all Kentucky community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Kentucky utilities
Population Served
707
~519 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
17 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
TTHM MCL EXCEEDANCE 0.083 MG/L 0.080 mg/L 2024 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2024 Resolved
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2024 Resolved
TTHM MCL EXCEEDANCE 0.082 MG/L 0.080 mg/L 2023 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2022 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2020 Resolved
TTHM MCL EXCEEDANCE 0.091 MG/L 0.080 mg/L 2017 Resolved
TTHM MCL EXCEEDANCE 0.112 MG/L 0.080 mg/L 2017 Resolved
TTHM MCL EXCEEDANCE 0.113 MG/L 0.080 mg/L 2017 Resolved
TTHM MCL EXCEEDANCE 0.108 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.096 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.091 MG/L 0.080 mg/L 2016 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.084 MG/L 0.080 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

17 violations are on record since 2015, of which 15 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Hanson Water System
PWSID KY0540656
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 707
Service connections 519
Systems serving this area 3
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Hanson tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Hanson water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Hanson? ▼
Hanson Water System (PWSID KY0540656), one of 3 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2025-08-28. No significant deficiencies were recorded.

What Should Hanson Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kentucky

Madisonville, Ky Tap Water Quality 2026 Hopkins Dawson Springs, Ky Tap Water Quality 2026 Hopkins Earlington, Ky Tap Water Quality 2026 Hopkins Nortonville, Ky Tap Water Quality 2026 Hopkins White Plains, Ky Tap Water Quality 2026 Hopkins Mortons Gap, Ky Tap Water Quality 2026 Hopkins