States ›Kentucky ›Green County ›Summersville

Summersville, KY Tap Water Quality 2026

Water quality report for Summersville, KY — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Summersville's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Green Taylor Water District PWSID: KY0440167 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. No PFAS was detected.

B

Summersville earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: not detected
PFAS tested, none detected
11 violations since 2015, 7 health-based
No violations currently open
Summersville's lead level vs. all Kentucky community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Kentucky utilities
Population Served
551
~6290 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
11 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Public Notice OTHER — — 2017 Resolved
Public Notice OTHER — — 2017 Resolved
Public Notice OTHER — — 2017 Resolved
Public Notice OTHER — — 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.066 MG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.077 MG/L 0.060 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.083 MG/L 0.080 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.077 MG/L 0.060 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.088 MG/L 0.080 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 0.078 MG/L 0.060 mg/L 2015 Resolved
TTHM MCL EXCEEDANCE 0.09 MG/L 0.080 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

11 violations are on record since 2015, of which 7 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Green Taylor Water District
PWSID KY0440167
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 551
Service connections 6,290
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Summersville tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Summersville water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Summersville? ▼
Green Taylor Water District (PWSID KY0440167). Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2026-02-17. No significant deficiencies were recorded.

What Should Summersville Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kentucky

Greensburg, Ky Tap Water Quality 2026 Green