States ›Kansas ›Wyandotte County ›Bonner Springs

Bonner Springs, KS Tap Water Quality 2026

Water quality report for Bonner Springs, KS — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Bonner Springs's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Bonner Springs, City Of PWSID: KS2020904 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.00 ppb, 7% of the action level and no violations are open. No PFAS was detected.

A

Bonner Springs earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.00 ppb — 7% of the federal action level
PFAS tested, none detected
8 violations since 2015, 0 health-based
No violations currently open
Bonner Springs's lead level vs. all Kansas community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.00 ppb — 7% of the federal action level
✓ Lower lead than 91% of Kansas utilities
Population Served
7829
~2872 connections
Water Source
Surface water
Purchased groundwater under surface water influence — SDWIS source code GUP
Active Violations
0
8 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
7% of EPA action level
1.00 ppb
Action level: 15 ppb
Copper (Cu)
90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.
115.4% of EPA action level
1,500 ppb
Action level: 1,300 ppb
The 90th-percentile lead result is 1.00 ppb, 7% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Lead and Copper Rule MONITORING AND REPORTING — TT 2022 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2021 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2021 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2020 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2020 Resolved
Lead and Copper Rule MONITORING AND REPORTING — TT 2017 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2017 Resolved
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2017 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

8 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Bonner Springs, City Of
PWSID KS2020904
Water source Surface water — Purchased groundwater under surface water influence — SDWIS source code GUP
Population served 7,829
Service connections 2,872
Systems serving this area 4
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Bonner Springs tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.00 ppb, 7% of the action level.
Does Bonner Springs water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Bonner Springs? ▼
Bonner Springs, City Of (PWSID KS2020904), one of 4 systems serving this area. Surface water. Purchased groundwater under surface water influence — SDWIS source code GUP
When was this system last inspected? ▼
It was last inspected on 2025-03-20. No significant deficiencies were recorded.

What Should Bonner Springs Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Kansas

Kansas City, Ks Tap Water Quality 2026 Wyandotte Edwardsville, Ks Tap Water Quality 2026 Wyandotte