States ›Indiana ›Ripley County ›Napoleon

Napoleon, IN Tap Water Quality 2026

Water quality report for Napoleon, IN — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Napoleon's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Napoleon Community Rural Water Corp. PWSID: IN5269007 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.47 ppb, 10% of the action level and no violations are open. No PFAS was detected.

B

Napoleon earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.47 ppb — 10% of the federal action level
PFAS tested, none detected
5 violations since 2015, 4 health-based
No violations currently open
Napoleon's lead level vs. all Indiana community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.47 ppb — 10% of the federal action level
✓ Lower lead than 77% of Indiana utilities
Population Served
236
~1739 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
5 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
10% of EPA action level
1.47 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.47 ppb, 10% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 64.9 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 61 UG/L 0.060 mg/L 2015 Resolved
Coliform (TCR) MONITORING AND REPORTING — 5% of samples 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 61.3 UG/L 0.060 mg/L 2015 Resolved
Total Haloacetic Acids (HAA5) MCL EXCEEDANCE 62 UG/L 0.060 mg/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

5 violations are on record since 2015, of which 4 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Napoleon Community Rural Water Corp.
PWSID IN5269007
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 236
Service connections 1,739
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Napoleon tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.47 ppb, 10% of the action level.
Does Napoleon water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Napoleon? ▼
Napoleon Community Rural Water Corp. (PWSID IN5269007). Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2025-05-01. No significant deficiencies were recorded.

What Should Napoleon Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Indiana

Batesville, In Tap Water Quality 2026 Ripley Versailles, In Tap Water Quality 2026 Ripley Osgood, In Tap Water Quality 2026 Ripley Milan, In Tap Water Quality 2026 Ripley Sunman, In Tap Water Quality 2026 Ripley Holton, In Tap Water Quality 2026 Ripley