Kendallville, IN Tap Water Quality 2026

Water quality report for Kendallville, IN — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Kendallville's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Kendallville Water Department PWSID: IN5257008 Updated: 2026 Q2

✅

No federal limits exceeded on record

Lead is 4.06 ppb, 27% of the action level and no violations are open. No PFAS was detected.

Kendallville earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 4.06 ppb — 27% of the federal action level

PFAS tested, none detected

2 violations since 2015, 0 health-based

No violations currently open

Kendallville's lead level vs. all Indiana community water systems

0 ppb5 ppb10 ppb15 ppb

Lead level: 4.06 ppb — 27% of the federal action level

✓ Lower lead than 27% of Indiana utilities

Population Served

10189

~3402 connections

Water Source

Groundwater

Drawn from wells — SDWIS source code GW

Active Violations

2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)

90th percentile of tap samples collected across the distribution system

27% of EPA action level

4.06 ppb

Action level: 15 ppb

Copper (Cu)

90th percentile of tap samples. SDWIS reports a copper figure only when a system exceeds the action level, so any value here is an exceedance.

108.5% of EPA action level

1,410 ppb

Action level: 1,300 ppb

The 90th-percentile lead result is 4.06 ppb, 27% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home. Copper reached the action level here; a copper figure appears in SDWIS only when a system triggers it.

Contaminant Violations (2015–Present)

Contaminant	Type	Measured	Limit	Period	Status
Consumer Confidence Rule	OTHER	—	—	2025	Resolved
Revised Total Coliform Rule	MONITORING FAILURE	—	—	2017	Resolved

Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Kendallville Water Department

PWSID IN5257008

Water source Groundwater — Drawn from wells — SDWIS source code GW

Population served 10,189

Service connections 3,402

Systems serving this area 1

Regulator State primacy agency

Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Kendallville tap water safe to drink? ▼

No federal limit is exceeded on record. No violations are currently open. Lead is 4.06 ppb, 27% of the action level.

Does Kendallville water have PFAS? ▼

It was tested for the six regulated PFAS compounds and none were detected.

Who supplies water to Kendallville? ▼

Kendallville Water Department (PWSID IN5257008). Groundwater. Drawn from wells — SDWIS source code GW

When was this system last inspected? ▼

It was last inspected on 2023-07-25. No significant deficiencies were recorded.

What Should Kendallville Residents Do?

Read your annual water report

Your supplier publishes a Consumer Confidence Report each July covering the prior year.

Check for a lead service line

Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.

Flush before drinking

If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Indiana

Ligonier, In Tap Water Quality 2026 Noble Avilla, In Tap Water Quality 2026 Noble Albion, In Tap Water Quality 2026 Noble Rome City, In Tap Water Quality 2026 Noble Cromwell, In Tap Water Quality 2026 Noble Kimmell, In Tap Water Quality 2026 Noble