States ›Illinois ›Washington County ›Richview

Richview, IL Tap Water Quality 2026

Water quality report for Richview, IL — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Richview's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Richview PWSID: IL1890500 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Richview earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
2 violations since 2015, 0 health-based
No violations currently open
Richview's lead level vs. all Illinois community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Illinois utilities
Population Served
187
~186 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
LEAD AND COPPER RULE REVISIONS REPORTING FAILURE — — 2025 Unaddressed
Chlorine MONITORING AND REPORTING — 4.0 mg/L 2021 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Richview
PWSID IL1890500
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 187
Service connections 186
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Richview tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Richview water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Richview? ▼
Richview (PWSID IL1890500). Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2024-12-11. Inspectors recorded 1 significant deficiency.

What Should Richview Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Illinois

Nashville, Il Tap Water Quality 2026 Washington Okawville, Il Tap Water Quality 2026 Washington Irvington, Il Tap Water Quality 2026 Washington Hoyleton, Il Tap Water Quality 2026 Washington Ashley, Il Tap Water Quality 2026 Washington New Minden, Il Tap Water Quality 2026 Washington