States ›Iowa ›Van Buren County ›Keosauqua

Keosauqua, IA Tap Water Quality 2026

Water quality report for Keosauqua, IA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Keosauqua's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Keosauqua Water Works PWSID: IA8938026 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead was not detected and no violations are open. PFAS has never been sampled at this system.

B

Keosauqua earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: not detected
PFAS never sampled at this system
3 violations since 2015, 0 health-based
No violations currently open
Keosauqua's lead level vs. all Iowa community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Iowa utilities
Population Served
810
~583 connections
Water Source
Surface water
Purchased from another system — SDWIS source code SWP
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2023 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Revised Total Coliform Rule MONITORING FAILURE — — 2017 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Keosauqua Water Works
PWSID IA8938026
Water source Surface water — Purchased from another system — SDWIS source code SWP
Population served 810
Service connections 583
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Keosauqua tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open.
Does Keosauqua water have PFAS? ▼
This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.
Who supplies water to Keosauqua? ▼
Keosauqua Water Works (PWSID IA8938026), one of 2 systems serving this area. Surface water. Purchased from another system — SDWIS source code SWP
When was this system last inspected? ▼
It was last inspected on 2023-07-25. No significant deficiencies were recorded.

What Should Keosauqua Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Iowa

Farmington, Ia Tap Water Quality 2026 Van Buren Birmingham, Ia Tap Water Quality 2026 Van Buren Stockport, Ia Tap Water Quality 2026 Van Buren Bonaparte, Ia Tap Water Quality 2026 Van Buren Milton, Ia Tap Water Quality 2026 Van Buren Cantril, Ia Tap Water Quality 2026 Van Buren