States ›Iowa ›Marion County ›Swan

Swan, IA Tap Water Quality 2026

Water quality report for Swan, IA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Swan's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Marion Co. Rural Water District PWSID: IA6342711 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.90 ppb, 13% of the action level and no violations are open. No PFAS was detected.

A

Swan earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.90 ppb — 13% of the federal action level
PFAS tested, none detected
2 violations since 2015, 0 health-based
No violations currently open
Swan's lead level vs. all Iowa community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.90 ppb — 13% of the federal action level
✓ Lower lead than 59% of Iowa utilities
Population Served
52
~2275 connections
Water Source
Groundwater
Purchased groundwater from another system — SDWIS source code GWP
Active Violations
0
2 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
13% of EPA action level
1.90 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.90 ppb, 13% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Public Notice OTHER — — 2025 Unaddressed
Nitrite MONITORING AND REPORTING — 1 mg/L 2023–2024 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

2 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Marion Co. Rural Water District
PWSID IA6342711
Water source Groundwater — Purchased groundwater from another system — SDWIS source code GWP
Population served 52
Service connections 2,275
Systems serving this area 2
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Swan tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.90 ppb, 13% of the action level.
Does Swan water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Swan? ▼
Marion Co. Rural Water District (PWSID IA6342711), one of 2 systems serving this area. Groundwater. Purchased groundwater from another system — SDWIS source code GWP
When was this system last inspected? ▼
It was last inspected on 2024-01-29. No significant deficiencies were recorded.

What Should Swan Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Iowa

Pella, Ia Tap Water Quality 2026 Marion Knoxville, Ia Tap Water Quality 2026 Marion Pleasantville, Ia Tap Water Quality 2026 Marion Melcher-Dallas, Ia Tap Water Quality 2026 Marion Bussey, Ia Tap Water Quality 2026 Marion Harvey, Ia Tap Water Quality 2026 Marion