States ›Iowa ›Franklin County ›Hampton

Hampton, IA Tap Water Quality 2026

Water quality report for Hampton, IA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Hampton's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Hampton Muni Water Works PWSID: IA3544024 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 6.20 ppb, 41% of the action level and no violations are open. No PFAS was detected.

B

Hampton earns a B for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 6.20 ppb — 41% of the federal action level
PFAS tested, none detected
1 violations since 2015, 1 health-based
No violations currently open
Hampton's lead level vs. all Iowa community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 6.20 ppb — 41% of the federal action level
✓ Lower lead than 9% of Iowa utilities
Population Served
4262
~1839 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
1 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
41% of EPA action level
6.20 ppb
Action level: 15 ppb
The 90th-percentile lead result is 6.20 ppb, 41% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Combined Radium (-226 and -228) MCL EXCEEDANCE 6.325 PCI/L 5 pCi/L 2015 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

1 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Hampton Muni Water Works
PWSID IA3544024
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 4,262
Service connections 1,839
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Hampton tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 6.20 ppb, 41% of the action level.
Does Hampton water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Hampton? ▼
Hampton Muni Water Works (PWSID IA3544024). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-09-08. No significant deficiencies were recorded.

What Should Hampton Residents Do?

1
Consider a filter certified for lead
Look for NSF/ANSI 53 certification for lead reduction.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Iowa

Sheffield, Ia Tap Water Quality 2026 Franklin Latimer, Ia Tap Water Quality 2026 Franklin Coulter, Ia Tap Water Quality 2026 Franklin Geneva, Ia Tap Water Quality 2026 Franklin Alexander, Ia Tap Water Quality 2026 Franklin Hansell, Ia Tap Water Quality 2026 Franklin