Floyd, IA Tap Water Quality 2026

Water quality report for Floyd, IA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Floyd's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Floyd Muni Water Supply PWSID: IA3414044 Updated: 2026 Q2

✅

No federal limits exceeded on record

Lead is 10.00 ppb, 67% of the action level and no violations are open. PFAS has never been sampled at this system.

Floyd earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 10.00 ppb — 67% of the federal action level

PFAS never sampled at this system

1 violations since 2015, 1 health-based

No violations currently open

Floyd's lead level vs. all Iowa community water systems

0 ppb5 ppb10 ppb15 ppb

Lead level: 10.00 ppb — 67% of the federal action level

✓ Lower lead than 3% of Iowa utilities

Population Served

235

~162 connections

Water Source

Groundwater

Drawn from wells — SDWIS source code GW

Active Violations

1 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)

90th percentile of tap samples collected across the distribution system

67% of EPA action level

10.00 ppb

Action level: 15 ppb

The 90th-percentile lead result is 10.00 ppb, 67% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

Contaminant	Type	Measured	Limit	Period	Status
Di(2-ethylhexyl) phthalate	MCL EXCEEDANCE	0.0068 MG/L	0.006 mg/L	2019	Resolved

Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

1 violations are on record since 2015, of which 1 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Floyd Muni Water Supply

PWSID IA3414044

Water source Groundwater — Drawn from wells — SDWIS source code GW

Population served 235

Service connections 162

Systems serving this area 1

Regulator State primacy agency

Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Floyd tap water safe to drink? ▼

No federal limit is exceeded on record. No violations are currently open. Lead is 10.00 ppb, 67% of the action level.

Does Floyd water have PFAS? ▼

This system has never been sampled for PFAS. EPA's national monitoring covered systems serving 3,300 people or more, so no results exist — which is not evidence that none is present.

Who supplies water to Floyd? ▼

Floyd Muni Water Supply (PWSID IA3414044). Groundwater. Drawn from wells — SDWIS source code GW

When was this system last inspected? ▼

It was last inspected on 2025-11-24. No significant deficiencies were recorded.

What Should Floyd Residents Do?

Consider a filter certified for lead

Look for NSF/ANSI 53 certification for lead reduction.

Check for a lead service line

Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.

Flush before drinking

If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Iowa

Charles City, Ia Tap Water Quality 2026 Floyd Nora Springs, Ia Tap Water Quality 2026 Floyd Rockford, Ia Tap Water Quality 2026 Floyd Rudd, Ia Tap Water Quality 2026 Floyd Marble Rock, Ia Tap Water Quality 2026 Floyd Colwell, Ia Tap Water Quality 2026 Floyd