Evansdale, IA Tap Water Quality 2026

Water quality report for Evansdale, IA — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Evansdale's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Evansdale Water Works PWSID: IA0723027 Updated: 2026 Q2

✅

No federal limits exceeded on record

Lead is 1.20 ppb, 8% of the action level and no violations are open. PFAS was sampled but not enough times for a compliance determination.

Evansdale earns a B for water quality

Graded on violations and lead, with state inspection findings. PFAS not tested.

Lead: 1.20 ppb — 8% of the federal action level

PFAS sampled, too few results to judge

1 violations since 2015, 0 health-based

No violations currently open

Evansdale's lead level vs. all Iowa community water systems

0 ppb5 ppb10 ppb15 ppb

Lead level: 1.20 ppb — 8% of the federal action level

✓ Lower lead than 79% of Iowa utilities

Population Served

4509

~2028 connections

Water Source

Groundwater

Drawn from wells — SDWIS source code GW

Active Violations

1 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)

90th percentile of tap samples collected across the distribution system

8% of EPA action level

1.20 ppb

Action level: 15 ppb

The 90th-percentile lead result is 1.20 ppb, 8% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

Contaminant	Type	Measured	Limit	Period	Status
Revised Total Coliform Rule	MONITORING FAILURE	—	—	2019	Resolved

Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

1 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Evansdale Water Works

PWSID IA0723027

Water source Groundwater — Drawn from wells — SDWIS source code GW

Population served 4,509

Service connections 2,028

Systems serving this area 2

Regulator State primacy agency

Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Evansdale tap water safe to drink? ▼

No federal limit is exceeded on record. No violations are currently open. Lead is 1.20 ppb, 8% of the action level.

Does Evansdale water have PFAS? ▼

It was sampled, but no sampling point had enough results for a compliance determination.

Who supplies water to Evansdale? ▼

Evansdale Water Works (PWSID IA0723027), one of 2 systems serving this area. Groundwater. Drawn from wells — SDWIS source code GW

When was this system last inspected? ▼

It was last inspected on 2024-06-10. No significant deficiencies were recorded.

What Should Evansdale Residents Do?

Read your annual water report

Your supplier publishes a Consumer Confidence Report each July covering the prior year.

Check for a lead service line

Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.

Flush before drinking

If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Iowa

Waterloo, Ia Tap Water Quality 2026 Black Hawk Cedar Falls, Ia Tap Water Quality 2026 Black Hawk Hudson, Ia Tap Water Quality 2026 Black Hawk La Porte City, Ia Tap Water Quality 2026 Black Hawk Elk Run Heights, Ia Tap Water Quality 2026 Black Hawk Gilbertville, Ia Tap Water Quality 2026 Black Hawk