States ›Florida ›Brevard County ›Melbourne Beach

Melbourne Beach, FL Tap Water Quality 2026

Water quality report for Melbourne Beach, FL — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Melbourne Beach's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Melbourne, City Of PWSID: FL3051447 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 1.20 ppb, 8% of the action level and no violations are open. No PFAS was detected.

A

Melbourne Beach earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 1.20 ppb — 8% of the federal action level
PFAS tested, none detected
3 violations since 2015, 0 health-based
No violations currently open
Melbourne Beach's lead level vs. all Florida community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 1.20 ppb — 8% of the federal action level
✓ Lower lead than 62% of Florida utilities
Population Served
3231
~60269 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
3 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
8% of EPA action level
1.20 ppb
Action level: 15 ppb
The 90th-percentile lead result is 1.20 ppb, 8% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule MONITORING FAILURE — — 2025 Archived
Total Haloacetic Acids (HAA5) MONITORING AND REPORTING — 0.060 mg/L 2023 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2023 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

3 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Melbourne, City Of
PWSID FL3051447
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 3,231
Service connections 60,269
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Melbourne Beach tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 1.20 ppb, 8% of the action level.
Does Melbourne Beach water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Melbourne Beach? ▼
Melbourne, City Of (PWSID FL3051447). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2024-08-27. No significant deficiencies were recorded.

What Should Melbourne Beach Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Florida

Palm Bay, Fl Tap Water Quality 2026 Brevard Melbourne, Fl Tap Water Quality 2026 Brevard Titusville, Fl Tap Water Quality 2026 Brevard Merritt Island, Fl Tap Water Quality 2026 Brevard Rockledge, Fl Tap Water Quality 2026 Brevard West Melbourne, Fl Tap Water Quality 2026 Brevard